How To Fix The Laptop Power Jack Without Soldering? Step-By-Step Guide

How to fix the laptop power jack without soldering

How to fix the laptop power jack without soldering?

This article is covering a complete step-by-step guide about how to fix the laptop power jack without sodering. If your laptop detects a charge only by flipping or turning the charger pin on one side or not, it may be due to a problem with the charger cable, connector, or DC jack (within the laptop). Want to learn how to fix a laptop power jack without soldering? But how do you know if the problem is with a laptop or charger?
Regrettably, soldering is usually required for most methods. A laptop power jacket is generally attached to the motherboard and cannot be removed without a soldering iron. If you want to fix this yourself or ask your friend, you can get a low soldering iron.
Keep in mind that using a soldering iron can be very dangerous if you are not careful. At that time, please wear protective gear.
First, consider the inevitable outcome and then move on to other solutions. It is hoped that your laptop will be powered by this end.
Damage to power jacks is often caused by:

  • Insufficient reinforcement within the casing and motherboard, causing stress to the system
  • Over time, parts become loose
  • If the charger is dropped or pulled
  • An incorrectly soldered power jack


How to fix the laptop power jack without soldering?

How to fix the laptop power jack without soldering
This is usually not possible as most laptops use a motherboard power plug. Therefore, it is necessary to heat the soldering iron to find its place. All necessary tools should be prepared before starting the repair work. Here are some tools you may need.
The following items are needed:

  • AC adapters are compatible with your laptop. In general, (usually the size, colors, and other attributes)
  • Sharpie or highlighter with an empty chamber Electrical tapes
  • Zip ties and ​​Multimeter
  • Pliers and wire cutters
  • Tools for stripping wires, etc. (for laptop’s AC)
  • A screwdriver with nails, a drill, and a hammer (or another tool that can hold the barrel in position while you make holes) are some tools that are useful for boring holes.

You would love to check our collection of 7 Best 17-inch laptop with backlit keyboard.

Determine the Real Problem

It is essential to identify correct issues that may affect the DC jack before each requires a different solution.

  1. This power jack has damaged internal pins.
  2. There is damage on both sides.
  3. The DC input jack will spark when connected.
  4. The DC jack on my laptop didn’t have a cap.
  5. There was a problem with the circuit connecting the jack on the motherboard to the circuit.
  6. When you join the charger pins, you will hear vibrations on the motherboard.

The following are some main points of a laptop DC jack that cannot be repaired with or without soldering. You can start identifying and solving every major problem by looking at this list of significant issues and their solutions.

Damage to Physical Components

Damaged laptop jack pins cannot be repaired or replaced; only the entire device is replaced. There may even be suggestions for adhering to it, but I don’t recommend it. If the connection is loose, the laptop charger cannot provide a steady stream. Continued use of the laptop can damage the charging pins and motherboard.
After removing the adapter from the motherboard, loosen the screw on the DC-IN jacket and remove it from the central unit. The jar should then be carefully and gently removed, as soldering directly to the board can do significant damage to the wires.

Steps to fix laptop power jack:

Steps to fix laptop power jack

  1. A barrel with two holes needs to be prepared. For this, you must:
    • You will need to remove the marker’s tip and the ink holder section.
    • Just drill a hole in the other side of the barrel, and there is no more to the marker barrel.
  1. It involves cutting the laptop cable. Two things are at stake in this situation. General-purpose AC adapter and AC adapter General-purpose AC adapter
    • The generic adapter’s cord should be cut to the required length. Ensure that the cable is not too long or too short.
    • In the barrel, insert the cable that was prepared earlier.
    • Please make sure the wires are exposed by stripping them.
    • Reduce the size of the cable that needs to be replaced by cutting.
    • Attach the cable to the tip part of the barrel. (Ensure the wires are exposed by stripping them out)
  1. Connect the two wires to repair the power jack. This is a crucial step, and you need to be aware of discontinuities. Use a multimeter to make sure you are using the correct wires.

After the above steps, you need to make sure that the barrel is sealed. You can add a zipper to prevent the wire from losing contact if someone pulls on the wire. The cable ties are there to prevent the cables from coming out of the power jack.

Precautions on how to fix a laptop charging port:

  1. If you do not have the right tool, go to your computer store and ask if it helps.
  2. Make sure your laptop is powered on before you perform these steps. There are two ways to do this: Connect another power-hungry device (like an alarm clock) or remove the battery from your laptop. Wait at least 5 seconds after unplugging to stop draining any remaining power from the plugged in.
  3. Please read the manual properly before resetting your laptop. Make sure the material is not lost.
  4. Follow safety rules when working on devices.


How to fix a broken laptop charger port?

How to fix a broken laptop charger port
You can fix a broken port at home if you follow each step carefully.
The cover is all you need to secure the port of your laptop at home. If you do not have a driver, you can buy one at your local electronics store.
You can use these tricks to repair broken ports on your laptop. Now, let’s get to the point.

  • Battery and power adapter must be connected:
  1. Turn off your laptop.
  2. Remove the laptop’s AC adapter and battery.
  3. Wait for 20 seconds following the power-up and press the on/off button on your laptop.
  4. Connect the charger and battery to the laptop again.
  5. Turn on your laptop and check whether the battery is charging.
  • Install a wall socket on your laptop:

Due to the eye mask you are wearing, it may not be possible to charge your laptop. It may affect the performance of the adapter. Turn off your laptop and immediately try connecting the AC adapter to a wall outlet. Start your laptop to see if it will fix the problem.

  • Alternate your AC adapter:

This issue may cause a malfunction of your AC adapter. You can use a different AC adapter to test whether your laptop can charge its battery. If the new AC adapter works, you need to replace the original AC adapter.

  • Install the latest battery driver:

An incorrect battery driver can cause this issue as well. Check if the problem is fixed by reinstalling the driver.
You can use the operating system’s Device Manager to reinstall the battery driver. Connect your laptop to the internet, find the battery driver in Device Manager, and uninstall it. Then restart your laptop, and the driver will be reinstalled automatically.

  • Getting support from Dell :

When all these methods fail to resolve the issue, we recommend contacting Dell for assistance. Contact them and ask the Dell support team to help you determine the problem. A laptop or battery can be replaced or repaired while it is still under warranty.

  • Go Chromebook :

You have a fast internet connection, free cloud storage, and endless web apps (Gmail, Google Docs, Slack, Facebook, Dropbox, Spotify, etc.). You can get locally installed programs and files used locally to run your entire Windows. You can do it. Storage – Completely obsolete.

How to fix a loose laptop charger port?

How to fix a loose laptop charger port

  • If your laptop charger port is loose, use a needle to repair it.
  • Next, remove the battery from the laptop.
  • Lift a small pin from the laptop charger port with the needle.
  • Then plug the charger into the laptop’s charging port.

You may need to lift the loose laptop charging port pin slightly if the charging port is still loose. It has now been resolved.
Here is the list of 10 Best 15 Inch laptop with number pad.

How to check a laptop power adapter without a multimeter?

  1. It is essential to read Important PC Repair Safety Tips due to the hazards involved in this process. Handling high voltage electricity is a necessary part of manually testing a power supply.
  2. This includes turning off your computer, unplugging the power cord, and unplugging anything else connected to the outside of your computer. To make it easier to test your power supply, you should also move the removed and opened computer case to a comfortable place to work, such as a desk or an uneven, non-static surface.
  3. Every internal device should have its power connector unplugged.
  4. Group all power cable and connectors for ease of testing. When arranging your power cables, it is highly recommended to reconnect the wires and pull them as far away from your computer case as possible. This makes testing the power connection as easy as possible.
  5. Connect a small piece of wire to pins 15 and 16 on the 24-pin motherboard power connector.
  6. Verify that the power supply voltage switch located on the power supply is set correctly for your country.
  7. Plug the power supply into an electrical outlet and turn it on. After you have correctly shorted the pins in Step 5, the fan should begin to run, assuming that the power supply is functional at least minimally.
  8. Connect the 24-pin power cable to the motherboard
  9. Switch on your laptop with the power switch on the front of the PC, and then plug in your power supply if you have one.
  10. Turn off your computer when the test is complete, unplug, and then put the cover back on the case.

If your power supply has been successfully tested or replaced, you may restart your computer or continue troubleshooting.


I know how to fix a laptop power jack without soldering, so I hope these tips and solutions will be of great help. Once I got to grips with this particular question, I spent a lot of time trying to understand it. This article explains how to use the resource to solve this problem at a meager price. You can also comment on personal issues and experiences that may be of interest to your visitors.
If you want to get detailed guides and valuable information about the best quality laptops visit our website Mrlaptopexpert and enjoy the best quality content of your interest.

Leave a Comment